abi>>forums

abi>>forums (http://www.anythingbutipod.com/forum/index.php)
-   Sansa View (http://www.anythingbutipod.com/forum/forumdisplay.php?f=74)
-   -   Recovery and Manufacturer Modes in the View (http://www.anythingbutipod.com/forum/showthread.php?t=23736)

advcomp2019 12-23-2007 01:45 PM

Recovery and Manufacturer Modes in the View
 
The View is starting to sound like the e200v1 in a way.

You can get into Recovery mode by these steps.
1. Turn off the View
2. Turn on the Hold
3. Hold the "Home" button
4. While holding the "Home" button, plug in the View to the computer

That should bring up the "16MB-FORMAT" drive on the computer.


You can get into Manufacturer mode by these steps.
1. Turn off the View
2. Turn on the Hold
3. Hold the "Select" button
4. While holding the "Select" button, plug in the View to the computer

That should ask for drivers, but your operating system most likely does not have the drivers for this mode.

Recovery mode and Manufacturer mode is to repair the firmware if your View does not work right and if you ruled out your battery is dead.

Thanks to crackmonkey421 from Rockbox for finding this info. Plus click here for the Rockbox thread that I got the info from.


All times are GMT -5. The time now is 03:33 AM.