abi>>forums

abi>>forums (http://www.anythingbutipod.com/forum/index.php)
-   Samsung S3 / S5 (http://www.anythingbutipod.com/forum/forumdisplay.php?f=118)
-   -   Upgrade YP-S3 to UMS with RDS-functionality (http://www.anythingbutipod.com/forum/showthread.php?t=50765)

Cyrano 12-21-2009 04:15 AM

Upgrade YP-S3 to UMS with RDS-functionality
 
This guide http://www.anythingbutipod.com/forum...8&postcount=14 works fine if you just want to upgrade your YP-S3 to UMS-Mode. However the RDS-functionality will not be available anymore. The solution. Instead of this config.dat
YP-S3
US EN UMS


use this one:
YP-S3
EU EU UMS


Now RDS & UMS works like a charme :)

If you already upgraded your player and you want to enable RDS just repeat the whole upgrade:
1. Go to http://www.samsung.com/download/index.aspx?agreement=y, look for a YP-S3 without J in its name and get the latest firmware
2. unzip the file
3. check that you have a S3.ROM and NOT a S3J.ROM
4. connect your player with your PC
5. copy S3.ROM into the root-folder of your YP-S3
6. Open notepad or any other texteditor and create a file with this text
YP-S3
EU EU UMS

7. save it into the root of S3
8. unplug the player
9. power on and wait until the upgrade finished

knowmad 12-26-2009 06:29 PM

I tried this on my YP-S3JAB/XAA device. It did not convert to UMS mode. I then retried updating the rom using the following config.dat settings:

YP-S3
KR KO UMS

This worked! Also, I was able to upgrade the firmware from Linux (Ubuntu Karmic Koala) which recognized and mounted the original device using the gphoto2 library. YMMV!

knowmad 12-26-2009 06:38 PM

I tried this on my YP-S3JAB/XAA device. It did not convert to UMS mode. I then retried updating the rom using the following config.dat settings:

YP-S3
KR KO UMS

This worked! Also, I was able to upgrade the firmware from Linux (Ubuntu Karmic Koala) which recognized and mounted the original device using the gphoto2 library. YMMV!


All times are GMT -5. The time now is 04:54 PM.