abi>>forums

abi>>forums (http://www.anythingbutipod.com/forum/index.php)
-   Insignia Pilot (http://www.anythingbutipod.com/forum/forumdisplay.php?f=124)
-   -   Notes on disassembly of NS-4V24 and NS-8V24 (http://www.anythingbutipod.com/forum/showthread.php?t=56076)

aarons510 07-04-2010 06:58 PM

Notes on disassembly of NS-4V24 and NS-8V24
 
Edit: After starting this thread, I have found that there is an old thread with my info and a lot more, including photos, at:

http://www.anythingbutipod.com/forum...ad.php?t=37643

Jedifish 07-26-2010 04:16 PM

Quote:

Originally Posted by aarons510 (Post 481814)
While I don't have the time now to post photos or to write a detailed description, I want to share a few observations about disassembling these Insignia Pilots.

1) The bad news is that the LCD can not be replaced unless you have the equipment and skills for fairly fine soldering.

2) Just about everything else can be easily removed and replaced, including the battery, the memory daughter card, the front panel and the control wheels.

More later.

Hi

I'd be interested in a little more help for removing the back panel (I think I read that that was a screw holding it in?) and replacing the battery. My player has been freezing lately, and now it is just shutting off. I'm thinking the battery is dying. I was going to order a new one.

Thanks

Greg

aarons510 07-26-2010 06:40 PM

There's a small plastic disc at the bottom edge of the back panel, to the left of center. You have to pry it off to get to the screw underneath.

Jedifish 07-27-2010 07:55 AM

Quote:

Originally Posted by aarons510 (Post 486317)
There's a small plastic disc at the bottom edge of the back panel, to the left of center. You have to pry it off to get to the screw underneath.

Thanks. I was afraid of breaking it.


All times are GMT -5. The time now is 01:14 PM.