abi>>forums

abi>>forums (http://www.anythingbutipod.com/forum/index.php)
-   Walkman E Series (http://www.anythingbutipod.com/forum/forumdisplay.php?f=192)
-   -   NWZ-E443 disassembly procedure (http://www.anythingbutipod.com/forum/showthread.php?t=65887)

paleologos 10-05-2011 05:54 PM

NWZ-E443 disassembly procedure
 
i just made a tutorial on how to disassemble your nwz-e443/e445 with less danger to damage it (this is not an official guide or service manual it's created by me and i have no responsibility of any damage use it at your own risk! i made all the steps till you get the engine module out of the housing if you just want to change the battery proceed till the step4
link:http://www.4shared.com/document/2Dqb...3wreckage.html

RJ99 01-22-2013 02:35 PM

Quote:

Originally Posted by paleologos (Post 578282)
i just made a tutorial on how to disassemble your nwz-e443/e445 with less danger to damage it (this is not an official guide or service manual it's created by me and i have no responsibility of any damage use it at your own risk! i made all the steps till you get the engine module out of the housing if you just want to change the battery proceed till the step4
link:http://www.4shared.com/document/2Dqb...3wreckage.html

Really keen to open up & 'ventilate' my NWZ-E443 (it got accidentally dunked in a Starbucks!) - your tutorial seems no longer available ... The file link that you requested is not valid. can you help?

Thanks in advance

Robin ('RJ99')

paleologos 03-27-2013 01:19 PM

It's an easy but
 
[QUOTE=RJ99;630589]Really keen to open up & 'ventilate' my NWZ-E443 (it got accidentally dunked in a Starbucks!) - your tutorial seems no longer available ... The file link that you requested is not valid. can you help?

Thanks in advance

Robin ('RJ99')
[/QUOTE

sorry but this guide and other useful stuff lost after an hdd damage; i cannot upload it again however as i remember there are 2 screws on the back and 4 more in the front covered by the joypad (play fwd rew etc) you have to carefully pull out the joypad by lifting it up with a credit card; be carefull insert the corner of the card in the gap between the joypad and the silver bezel and lift it up slowly as the duct tape that hold it is quite strong. remove the 4 screws, remove the silver bezel and gently pull out the engine assembly from the bottom case. You will need something like double-faced duct tape to stick the joypad again on the module.


All times are GMT -5. The time now is 02:28 PM.