android
Prev Previous Post   Next Post Next
  #1  
Old 10-25-2007, 08:40 AM
GumbyX84's Avatar
GumbyX84 GumbyX84 is offline
Member
 
Join Date: Oct 2007
Posts: 250
Default UMS/MSC Mode Available on View

I know most of you might not care, but I know a few people here will be happy to know that there IS a hidden UMS/MSC mode on the View!!! Those tipsters here that said you can launch this transfer mode the same way you would on a Sansa Clip are right. They just didn't explain it properly. These are the steps you will need to follow:

1. Plug your transfer cable into a USB port on your PC.
2. Fully shut down the View (hold up power/hold switch for 5-10 Seconds)
3. Turn the View back on
4. After the View has fully booted up, place it in hold mode
5. Press down the left side of the scroll wheel
6. While still holding down the scroll wheel, plug the cable into your View
7. Keep the scroll wheel pressed down until the device is mounted in your selected OS

And ta-da!! Your View is now connected to you PC through UMS/MSC mode. Thanks to those of you that posted about this, and detrino for fully explaining this. I know I am greatful for you guys finding this out.

EDIT (EnzoTen):
Make sure you do not have Sansa Updater install, you may run into problems. My player locked up with a BSOD when i tried to move files.

Edit (advcomp2019):
You can get MSC mode by changing your region.

Last edited by advcomp2019; 04-18-2008 at 12:10 AM.

Advertisement [Remove Advertisement]

 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -5. The time now is 10:23 AM.