Fuze USB 1.1 support?

[diik0nn]

Hi people,
fresh fuze owner here.
I'm wondering if any knows about or has successfully used the fuze to add files via USB 1.1?
I bought the 8gb model and I'm having trouble adding files, with my old Apple laptop that unfortunately only has USB 1.1.
Basically nothing seems to happen, the internal memory does not appear as an external storage device.
Any help would be appreciated,
Thank you.

[RCM]

Do you have it in MSC mode? Apple computers don't support MTP, so MSC mode is the only way to go, it will show on your computer as a flash drive in MSC mode BTW

[diik0nn]

thank you for the quick reply ^_^
At first I tried it in Auto-detect mode, and then in MSC mode, and seemed to be doing anything.

[soft_knee]

I've used the Fuze with USB 1.1 on a PC, no issues whatsoever (both MTP and MSC). It's just slower.

[diik0nn]

^^^
hey, thanks for letting me know it can be done!
I thought it might work after a firmware upgrade, but alas no luck.
I tested it in MSC on a pc, USB 2.0 of course, & it worked fine.
Back to the drawing board...

[advcomp2019]

Does your laptop have enough USB power to work? I think the Fuze needs 500mA to work the best. Some devices can not run with 100mA or less.

[diik0nn]

Originally Posted by advcomp2019

Does your laptop have enough USB power to work? I think the Fuze needs 500mA to work the best. Some devices can not run with 100mA or less.

ah, you may have a good point there. Although I haven't had any problems with bus powered USB stuff in the past, this could be something to look into?