|
#1
|
|||
|
|||
|
Got my new fuze, first thing i did was update firmware to v2 2.26A . Put my songs on it, fully charged it ( I think) battery stoped flashing and was solid. I'v done this a couple times. When i go to the info screen it shows the battery at only 94%. No rockbox installed as its v2.
So it seems the fuze thinks 100% charge is 94%. Question is does anyone else have this problem and how do I correct or calibrate it? Thanks 13dp |
|
|
|||
|
|
|
#2
|
||||
|
||||
|
Could be anything, even a defective battery. Just keep an eye on how many hours you get out of it. I mean, the solid battery indicator might not even mean that it's fully charged, but in a top percentage. Charge it overnight if you can.
__________________
Player: Generic Philips GoGear 4GB(Sounds decent though) Headphones: Koss KSC-75 and JVC Marshmallow Wow I'm poor.. |
|
#3
|
|||
|
|||
|
That is not such a large discrepancy. Battery meters just show an approximation. Draining the battery to around 1/4 or so of a charge then charging it fully for a few cycles in a row seems to typically recalibrate the battery meter. 94% vs 100% is not so meaningful though. Often there may be a much larger discrepancy than this. don't worry about this unless the battery meter is way off.
Last edited by JK98; 08-03-2009 at 09:20 PM. |
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
All times are GMT -5. The time now is 09:53 AM.











Linear Mode
