|
#1
|
|||
|
|||
|
Please! Someone Help! I had my Zen Vision:M plugged into my computer and was downloading new firmware for it and one of my kids knocked the zen out of the cradle. Everything worked great before this (I just installed a new battery). Now it just has a flashing blue light and wont sync or power on or anything.
What I have tried: -Took back off and unplugged battery then re-plugged in while holding power button on -plugged usb directly to device and held power on for 8 seconds Please any advice or ideas would be greatly appreciated! |
|
|
|||
|
|
|
#2
|
|||
|
|||
|
try to reset the player. there's a reset hole in the bottom of the ZVM near the sync/data port
|
|
#3
|
|||
|
|||
|
I did the reset at the bottom and nothing changed
.
|
|
#4
|
|||
|
|||
|
I have the same problem at the moment. I bought it secondhand but i'm also stuck in Recovery Mode. I also tried the hacked firmware updater. But I just don't get it recognized ..
|
![]() |
| Tags |
| black screen, firmware, flashing blue light, wont turn on, zen vision m |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
All times are GMT -5. The time now is 09:51 AM.











.

Linear Mode
