Porting Rockbox to YP-R0 (FAQ in the 1st post)

[VanniX]

@Predelnik:
Sometimes the female micro-usb connector died, and it must be resolder to work properly. you can disassemble the player and check if one (or more) pin(s) are disconnected from the board.

[CrowdAds]

[Predelnik]

Originally Posted by VanniX

@Predelnik:
Sometimes the female micro-usb connector died, and it must be resolder to work properly. you can disassemble the player and check if one (or more) pin(s) are disconnected from the board.

Yeah I could disassemble just fine but usb pins are really microscopic and I only have too big soldering iron for them (not that I very good in soldering in general). Maybe I'll ask some people in repairing workshops for doing it though))

[VanniX]

Yes, you could try.. Generally the cause of the USB malfunctioning are his pins, and not the electronic controller.
Keep us informed about it!

[Predelnik]

Pretty funny: haven't had much time to try to repair my r0 but kept using it with micro sd, 3 days ago I noticed that usb connection started working okay as it used to)) Dunno for how long it will last, but that was sure unexpected and positively surprising))

[lebellium]

That's due to higher temperatures in Russia those days! 25°C is good for R0