|
#1
|
|||
|
|||
|
Hey all,
I had an iAudio X5L with RockBox, and it was amazing. About two weeks ago, it stopped playing audio. Just stopped. It turns on and I can navigate and do everything normally, but it just doesn't play music. It takes slightly longer to load the track, and then a hell of a long time for it to show up "Next" at the bottom of the screen, if that means anything. At first I thought it was something with the firmware, but I formatted the 30GB drive I have, and it didn't help any. I also have a 20GB drive, but that didn't work either. From there I deduced that it's either a hardware problem or a bootloader/flashmem problem. I think I may eliminate that the cause is from a hardware problem, because once every about 20 boots, the audio works (but then I can't change the volume). If anybody has any clue as to what my problem is, I would greatly appreciate some help. Thanks in advance, Romanian |
|
|
|||
|
|
|
#2
|
||||
|
||||
|
Can you try reloading the original firmware, and then reinstalling rockbox again, to see if it works
__________________
Sansa View 16GB (DEAD) Sony Walkman NWZ-S544 (DEAD has a mind of it's own and don't feel like fixing it!) Zune HD 32GB (Retired) Samsung Galaxy tab 2 7.0 |
|
#3
|
|||
|
|||
|
I did try, but for some reason it didn't work. I suspect that the reason is because I run Linux Ubuntu. Why do I run Ubuntu? Well, it's because the player won't be recognized by Windows for some odd reason. And the original firmware is for Windows only, so I guess something is messed up. As far as I know, WINE won't run the firmware correctly. I'll try firing it up again, just to be sure.
|
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
All times are GMT -5. The time now is 02:27 AM.











Linear Mode
