Sound Settings with Bluetooth?

[fnzeee]

I am using my T10 with v3.06 MTP firmware (EU). I have noticed that none of these appear to function with / over bluetooth:

- DNSe
- Sound Effect
- Master EQ

The first two are grayed out completely on the T10. The master EQ lets you adjust, but the changes do not seem to affect audio through BT headphones.

Can anyone else using BT confirm that this is normal behavior? Is there anyway to enable EQ or sound effects with BT headphones (perhaps other firmware?)? The sound through mine is a bit muffled and I'd like to tweak it.

[CrowdAds]

[scuba]

It's the way my unit behaves as well, I believe it is normal.. and probably says so in the instruction manual.

I haven't noticed any sound quality issues in my Nokia BH-501 headphones.

[HKboy]

That is normal indeed, I think you can't transfer DNSe and sound effects like that through bluetooth

[pgh1969pa]

Originally Posted by HKboy

That is normal indeed, I think you can't transfer DNSe and sound effects like that through bluetooth

The Samsung T9B transfers DNSe and Street Mode via Bluetooth. Any sound can be transfered via bluetooth between 20 to 20,000 hz. Sony does the same things for the NWZ-A829.

[pgh1969pa]

Originally Posted by fnzeee

The master EQ lets you adjust, but the changes do not seem to affect audio through BT headphones.

I can hear suttle differences only using the master EQ & Bluetooth.

[HKboy]

Originally Posted by pgh1969pa

The Samsung T9B transfers DNSe and Street Mode via Bluetooth. Any sound can be transfered via bluetooth between 20 to 20,000 hz. Sony does the same things for the NWZ-A829.

I take that back, the YP-T10 does not send DNSe and Street mode through Bluetooth.

[fnzeee]

Thanks for confirming my own experimentation. One more thing to add to the firmware wishlist!