|
#1
|
|||
|
|||
|
Bluetooth problem.
When I try to access bluetooth it says : "Adress error" . before I updated my yp-t10jcb the bluetooth worked, but now somehow it wont work anymore. My english is not so good, so if anyone got the answer could they like make it easy xD . Thanks- peew
|
|
|
|||
|
|
|
#2
|
||||
|
||||
|
What firmware were you on before you updated it? I recommend you to downgrade to that firmware again, and then upgrade again. If the problem still occurs, try sticking to the firmware that worked.
__________________
All my words and deeds will help, honestly... I think... Or not... maybe... Yes it is!!!........ (or not) |
|
#3
|
|||
|
|||
|
I just tried to downgrade it again, but didn`t work.
My current Firmware Version 3.06 US 2008 5.29 |
|
#4
|
|||
|
|||
|
It could be the other device's problem
|
|
#5
|
|||
|
|||
|
Sounds like the bluetooth mac address became corrupt. If you paired it with your phone, you may be able get the address used by the P2 from the phone. Otherwise you can try to use a random hex number and establish a new one in it's place. See if this helps:
http://www.anythingbutipod.com/forum...ad.php?t=28116 |
|
#6
|
|||
|
|||
|
If you have the instructions for the bluetooth device then use it.
|
![]() |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
All times are GMT -5. The time now is 01:42 PM.










. Thanks

Linear Mode
