Howto: install other firmwares!
so please look first here before asking in another treath!
this is the how to to change from us to eu to kr to kv(la fleur) it works in every direction! even if the t10 is broken(updateloop)!
3)a small thing to press the reset button
4)http://haxx.rockbox.org/utils/tcctool/tcctool-win32.zip this is the tool
to patch your t10(more easy than fwdn!)
5) the new firmware
6)put both firmware files on the player
second: patching your t10
1) connect it in normal usbmode
2)hold the powerbutton and press the reset button
3)release the powerbutton when your pc shows "new device found"
4)install the driver which is located inthe linked archive!
5)go to => start => run/ausführen and enter "cmd"
6) drag the "tcctool.exe" in the consolewindow(cmd)
7) add " -d ypp2" with the gap behind the " of the dragged file! and then
again a gap and drag the small file in the console window!
8) press enter and wait until it sais "download" finished or s.th like that
9) release the player
third: upgrading the firmware
2)disconnect it and start it w.o connection to the pc
3) it updates the firmware
If these directions are confusing or not working for you, consider going directly to this post:
DONT MIND THE MAY SHOWING FIRMWARE UPDATE ON THE T10! IT UPDATES ONLY WHEN YOU PUT THE SECOND FILE ON THE PALYER LIKE NORMLY!
Last edited by sassafras; 09-12-2008 at 02:14 PM.
|changing firmware, eu to kr, kr to eu, tcctool|
|Thread Tools||Search this Thread|
All times are GMT -5. The time now is 09:14 PM.